YOKOGAWA Drive Kit: Motor model: DM1004C0F Driver model: SD1004C04 -2TN[used]

Description

Project Motor (DM1004C0F) Driver (SD1004C04-2TN)
Power rating Approximately 500W 500W level (specifically for DM1004)
Continuous torque 16 N·m (typical value) Output current is adapted to the motor peak
Peak torque 48 N·m (3 times, second-level) Peak current is approximately 3 times the continuous
Rated speed 30 r/min Time base and speed loop are adapted to low-speed high-torque
Maximum speed 100 r/min Subject to driver software limitations
Feedback Incremental encoder (C specification, up to 1,024,000 steps/rev after subdivision) Compatible with C specification encoder interface
Positioning accuracy Repeatable positioning ±2 arc seconds (typical) Short control cycle, optimized positioning algorithm
Power supply Driven by driver Single-phase / three-phase AC 200–240V, 50/60 Hz
Interface High-flexibility motor power / feedback line CN1 (RS-232C), CN5 (contact I/O), TB2 (brake), TB1 (motor)
Regeneration Requires external regeneration resistor With regeneration terminals (standard), must be equipped with a resistor to suppress overvoltage